Duotight Blowtie 2 Spunding Valve

Duotight Blowtie 2 Spunding Valve

$12.95

Duotight Blowtie 2 Spunding Valve has been designed for simplicity and ease of putting together.

If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.

The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure.

This BlowTie unit can be easily dissassembled for cleaning using a phillips head screw driver.

Designed to suit 5mm x 8mm Flexmaster Tubing

Specifications:
1. Suits pressures 0-23psi (but with different guages the unit can go above 100psi)
2. Made from food grade acetal
3. Stainless screws
4. 8mm (5/16″) push on both sides

Instructions:
Use the yellow adjustment knob to control the pressure coming out of the pressure vessel. Clockwise is higher pressure and anticlockwise is lower pressure.
We would recommend gassing a keg to a known pressure e.g. 15psi then attach your Blow Tie Kit to the keg and adjust to 10psi.

NOTE: These small guages enable the regulator to be so compact however for more accurate pressures readings we recommend getting different guages to suit the pressure range you want to use.

MPORTANT WARNING: Do not exceed gauge pressure.  If you set a gauge pressure higher than the graduations on the gauge you can damage the gauge.  (ie if you are using the 0-60psi gauge. Do not set pressure above 60psi or damage to the gauge may occur.

In stock

SKU: 9388866615042 Category:

Description

Duotight Blowtie 2 Spunding Valve is the awesome compact solution for adjusting residual pressure in your fermenter makes pressure control easier than it's ever been. This can be used for compressed air, CO2, nitrogen, mains water supply and many other things but it's primary use is to control the residual pressure inside fermenters.

Pressure Fermentations

With pressurised fermentation becoming ever more popular it has become increasingly important to have a method of regulating and controlling this residual pressure from the fermentation process.  The BlowTie has been designed specifically for this reason.

Pressure Transfers

When transferring from keg to keg, keg to bottle, or fermenter to keg it's often a good idea to have head pressure in the keg you are filling into especially if you are transferring a beverage that is carbonated. For this reason the BlowTie can consistenly control this head pressure giving you more consistent results and without losing carbonation in the process

Additional information

Weight .130 kg
Dimensions 11.5 × 9 × 9 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products